หัวแร้งปืน SUMO รุ่น 981 เร่งความร้อนได้เร็ว
Soldering Iron Gun Mod. 981 SUMO
คุณสมบัติ (Feature)
- หัวแร้งปืน SUMO รุ่น 981 มีลวดฮีทเตอร์เซรามิกเกรดพิเศษ ให้ความร้อนเร็ว
- ปุ่มเร่งความร้อนของ หัวแร้งปืน SUMO รุ่น 981 สามารถปรับอุณหภูมิได้ 350°C- 450°C
- ด้วยกรรมวิธีการผลิตที่มีประสิทธิภาพไม่เหมือนใครปลายหัวแร้งจึงมีอายุการใช้งานที่นาน ทนต่อการกัดกร่อนได้สูง(ทนกว่าปลายหัวแร้งแบบทองแดงถึง 10 เท่า)
- ผลิตจากสแตนเลส 304 ที่มีความทนต่อการเกิดสนิมสูงมาก
- หน้าแปลนไม่สัมผัสกับด้ามจับช่วยป้องกันไม่ให้ความร้อนถ่ายเทไปถึงด้ามจับได้
- A ceramic heater which quickly increases the temperature.
- A high-performance micro-switch.
- "6575" tip achieves excellent corrosion resistance thanks to our unique manufacturing method.
- Made of SUS304 for high resistance to rusting and oxidation caused by heat.
- A flange which prevents the heat from being transmitted to the grip.
เหมาะสำหรับ (Suitable for)
- หัวแร้งปืน SUMO รุ่น 981 เหมาะสำหรับงานบัดกรีทั่วไป เช่น ปัดกรีโลหะพวกทองแดง ทองเหลือง ใช้เวลาในการทำความร้อน 1-2 นาที
- Soldering pen, soldering iron, general brushing such as brushing metal, copper, brass takes 1-2 minutes to heat up.
วิธีการใช้ (How to use)
- เสียบปลั๊ก รอให้หัวแร้งร้อน 1-2 นาที
- นำปลายหัวแร้งจี้ชิ้นงาน รอจนตะกั่วละลาย
- ใช้น้ำยาประสาน เพื่อให้ตะกั่วละลายติดชิ้นงานได้ดียิ่งขึ้น
- Plug it in and wait 1-2 minutes for the soldering iron to heat up.
- Bring the tip of the soldering iron to pendant the workpiece. Wait until the lead melts.
- Use a solder solution to better dissolve the lead on the workpiece.
รายละเอียด (Specifications)
|
ขนาดสินค้า (Size) |
15.2x12 cm |
|
กำลังไฟ (Power consumption) |
20-130w |
|
ไส้หัวแร้งเซรามิก (Heating Element) |
Ceramic Heater |
|
ความต้านทานไฟฟ้า (Insulation Reaistance) |
1000-1100 Ohm |
|
ความยาว (Total Length) |
1.55mm |
|
น้ำหนัก (Weight) |
127 g |
ข้อแนะนำ (Suggestion)
- เลือกใช้กำลังไฟให้เหมาะสมกับลักษณะงาน
- ไม่ควรทำความสะอาดหัวแร้งด้วยกระดาษทราย เพราะจะทำให้สารเคลือบหลุดออก
- Choose the power that is suitable for the type of work.
- The soldering iron should not be cleaned with sandpaper as this will loosen the coating.