ปืนกาว 40W SUMO
Hot Melt Glue gun SUMO 40W
คุณสมบัติ (Feature)
- ปืนกาว 40W SUMO ทำความร้อนได้รวดเร็ว ใช้งานได้ทันทีภายใน 3-5 นาที
- มีการออกแบบที่ปลอดภัย
- มีฟิวส์ช่วยตัดไฟเมื่อเกิดไฟฟ้าลัดวงจร เพื่อป้องกันอุปกรณ์เสียหาย
- ปืนกาว 40W SUMO ปืนกาว DIY ที่ถูกออกแบบบนพื้นฐานความปลอดภัย มีฟิวส์ช่วยตัดไฟเมื่อเกิดไฟฟ้าลัดวงจร เพื่อป้องกันอุปกรณ์เสียหาย
- มีสวิตช์เปิด/ปิดพร้อมไฟ LED บอกสถานะการทำงานของปืนกาว
- หัวฉีดหุ้มด้วยซิลิโคนกันความร้อน
- น้ำหนักเบาและง่ายต่อการใช้งาน มีขาตั้งที่พับเก็บได้
- เหมาะสำหรับงาน DIY งานประดิษฐ์ ไม้ กระดาษ ผ้า พลาสติก เซรามิก โลหะ ฯลฯ
- แถมฟรี กาวแท่งขนาด (11mm) แถม 2 แท่งในแพ็ค
- น้ำหนักเบาและง่ายต่อการใช้งาน มีขาตั้งที่พับเก็บได้
- ปริมาณกาวที่ออก 3-4 กรัม / นาที
- SUPER FAST HEATING : It can be used immediately within 3-5 minutes.
- SAFETY DESIGN
- There is a fuse to help cut off the power when there is a short circuit to prevent equipment damage.
- The nozzle is covered with heat insulating rubber.
- Lightweight and easy to use There is a foldable stand.
- Suitable for DIY, wood, paper, fabric, plastic, ceramic, metal, etc.
เหมาะสำหรับ (suitable for)
-
ปืนกาว 40W SUMO ใช้ได้กับวัสดุหลายประเภท เช่น ไม้ กระดาษ ผ้า พลาสติก เซรามิก โลหะ ฯลฯ
-
It can be used for many materials such as wood, paper, cloth, plastic, ceramic, metal, etc.
วิธีใช้งาน (How to use)
- ใส่แท่งกาวลงในปืนยิงกาวร้อน
- เสียบปลั๊ก และเปิดสวิตช์
- ทิ้งไว้จนกาวร้อน ประมาณ 3.5 นาที สังเกตเมื่อบีบไกปืนจะมีเนื้อกาวไหลออกมา
- เริ่มทำงานได้
- Insert glue sticks.
- Swtich on and Turn on the glue gun.
- Leave it until the glue is hot, about 3.5 minutes. Notice that when you squeeze the trigger, the glue will flow out.
- Can begin working.
รายละเอียดสินค้า (Specification)
|
วัสดุ |
Pastic PA6 |
|
แรงดันไฟฟ้า |
220V |
|
ความถี่ |
50Hz |
|
กำลังไฟ |
40W |
|
วัสดุหัวฉีด |
Aluminum |
|
อุณหภูมิการทำงาน |
140 / 180℃ |
|
ปริมาณกาวที่ออก |
3-4 g/min |
|
ขนาดกาวแท่ง |
10 x 2mm |
|
ความยาวสายไฟ |
1.2 m |
|
ขนาดสินค้า Size |
10.7 x 7cm |
|
น้ำหนักสินค้า |
150 g |
การบำรุงรักษา (Maintenance)
- เช็ดหัวฉีดหลังใช้งานทันที เพื่อไม่ให้เกิดคราบมาปิดการไหลของกาว
- ควรม้วนสายไฟเก็บให้เรียบร้อยทุกครั้งหลังใช้งาน และไม่เก็บในที่ที่มีอุณหภูมิร้อนจัด
- Wipe the nozzle immediately after use to prevent stains come off the flow of glue.
- The power cord should be coiled up after each use and do not store in a place with extremely hot temperatures.
ข้อแนะนำ (Suggestion)
- ควรรอให้ปืนกาว 40W SUMO ร้อนมากพอที่จะทำให้กาวแท่งละลาย (หากความร้อนไม่พอ ไกปืนจะแข็งและเกิดความเสียหายได้)
- ห้ามใช้น้ำยาที่มีฤทธิ์เป็นกรด-ด่าง ในการทำความสะอาด
- ดึงปลั๊กออกเมื่อเลิกใช้งาน จัดเก็บในที่แห้ง และพ้นมือเด็ก
- Wait for the glue gun to get hot enough for the glue stick to melt. (If the heat is not enough the trigger will be stiff and can be damaged.)
- Do not use liquids that are acidic - alkaline in cleaning.
- Pull the plug out when not in use. Store in a dry place. and out of reach of children.
คำเตือน (Warning)
- หลีกเลี่ยงการใช้งานในที่ชื้น เพราะอาจทำให้เกิดไฟฟ้าช็อตได้
- อย่าจับปลายกระบอกปืนขณะใช้งาน เพราะมีความร้อนสูงมาก
- หากพบว่าปืนกาวมีความผิดปกติ ควรถอดสายไฟออกทันที และสามารถใช้ได้หลังจากการซ่อมแซมโดยผู้เชี่ยวชาญเท่านั้น
- Avoid using the gun in damp places because it may cause electric shock.
- Do not touch the tip of the gun while using it. because there is a very high store Fast heat up depending on the power size (watts).
- If the glue gun is found to be faulty. The power cord should be disconnected immediately. and can only be used after.