Install film shaft , Connect the power cable to turn the power on Install the film roll on the film shaft, after film roll pass the feed rod and been pulled in the middle of the belt, press the auto-feed button, and after the film pull out of the filling machine, then press the start button to fill air into the film roll.
The cover of C10 is plastic, weight of filling material(film) do not over 5 KG,during material loading, do NOT stress it or leaning.
During operation and loading material, please avoid direct touch to roller from finger, clothes, jewelry and hair.(tie hair up suggested)
Inflatable bag only suggest used as packing materials,do not use it as float, pillow, or child toy.
When the material is driven by the machine, static electricity will be generated. The material itself will also have static electricity. The operator cannot wear slippers or not wear shoes.
After long time operating the machine, if the film does not run smoothly or get stuck, please replace the blade in time.
After long time operating the machine, if appearance the sealing edge is not firm, broken seal edge, please confirm if the temperature proper, if the temperature belt broken, if yes, please replace it in time.
Speed and air volume of the air filling machine should adjust mutually, differ film have different parameter, no rated standard, need adjust the record according to the actual condition.
Do not open the belt cover. belt cover disassemble should done by authorized technicians and technician trained maintenance personnel.
Be careful of rolled into the machine! when machine start to work like pull the film,inflate the film or sealing, please keep finger, hair, jewelry, and clothes away from the sealing roller.
Be careful of scalded, pay attention to the surface of the sealing roller, high temperature sealing line may cause scalded!
